Eagle-tree OSD Pro Bedienungsanleitung PDF herunterladen

http://www.eagletreesystems.com

Main Screen

Instruction Manual for OSD Pro

Document Version 4.9

Corresponds to Eagle Tree Software

Version 10.44 or higher

Introduction

Thank you for your purchase! This instruction manual will guide you through the installation

and operation of your OSD Pro.

The latest version of this manual is available in the Product Manuals section of the Support

tab on http://www.eagletreesystems.com. The online manual includes any updates that were

made after your CD was produced. Please read the entire manual carefully before

proceeding.

If, after you read the manual, you have further questions or problems, see the “Have

Questions or Feedback?” section below.

Intended Uses

The OSD Pro is intended to be used exclusively for recreational purposes in model

planes, boats and cars. Any other use is not supported.

What is FPV?

If you are not familiar with FPV, there are many websites devoted to it. Our FPV

overview web page at http://www.eagletreesystems.com/OSD

has a brief tutorial on

FPV, which is a good place to start.

Quick Start Guide

We recommend that most customers start with basic OSD Pro setup, and then proceed

as desired to use more advanced features. A Quick Start Guide, which supplements

this manual, is included with your product. The latest version of the quick start guide

is available in the Product Manuals section of the Support tab on

http://www.eagletreesystems.com.

Packing List

Your package should include the following: The OSD Pro, and five (5) male to male servo connectors, and a printed version of the Quick Start Guide.

Additionally, if you purchased our complete OSD Pro package, you should have received an eLogger V4, and a GPS Module. Note that an eLogger V4,

eLogger V3, or Data Recorder is required for system operation, and our GPS module is recommended. Additionally, our Guardian Stabilization Expander

is available to provide stabilized flight and additional features.

Other Things You Need

To utilize the OSD Pro system, you will need (at a minimum) a video camera and video transmitter on your model, and a video receiver and video display on

the ground. Many of our dealers also sell video equipment. A list of FPV specific dealers can be found on our website at

http://www.eagletreesystems.com/OSD/OSD-Pro.htm.

What the OSD Pro Does

The OSD Pro is a powerful, modular, fully configurable

Video/Audio On-Screen Display (OSD) device, providing

graphics, voice announcements, alarms, acoustic variometer with

total energy compensation, Home Arrow, Artificial Horizon,

Return to Home, Failsafe, “RADAR”, waypoints, flight timer,

flight summary, saving and graphing your flight data (including

all sensor data), Google Earth data display, a flight simulator for

testing, and many other features. The information displayed can

be as simple or advanced as you like, depending on how you

configure the display, and on which optional Eagle Tree sensors

are connected.

To use your OSD Pro, you need the OSD Pro Expander, and the

eLogger V4/V3 or Data Recorder. To make full use of the OSD

1 2 3 4 5 6 ... 29 30

Inhaltsverzeichnis

Seite 1 - Introduction

Seite 2 - Have questions or Feedback?

Seite 3

Seite 4

Seite 5 - Tips for Using your OSD Pro

Seite 6

Seite 7

Seite 8

Seite 9

Seite 10 -

Seite 11 - Powering up your OSD Pro

Seite 12

Seite 13 - Serial PPM Support

Seite 14

Seite 15

Seite 16 - Setting up and Testing RTH

Seite 17

Seite 18

Seite 19

Seite 20

Seite 21

Seite 22

Seite 23

Seite 24

Seite 25

Seite 26

Seite 27

Seite 28 - FMA Co-Pilot CPD 4

Seite 29 - Troubleshooting

Seite 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Eagle-tree OSD Pro Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Eagle-tree OSD Pro herunter. Eagle Tree OSD Pro User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Eagle-tree OSD Pro